E-REVO Brushless 4WD TQi TSM w/o Batt & Charger (Solar Flare) 86086-4
E-REVO Brushless 4WD TQi TSM w/o Batt & Charger (Solar Flare) 86086-4
Traxxas E-REVO VXL with SOLAR FLARE Graphics
The new E-Revo retains all the original ground-breaking, award-winning design, but fortifies them with brutal strength and an intense attitude to deliver what is simply is the ultimate 6s brushless monster. Get yourself ready for a new level of speed, strength and power.
E-Revo Truck Specs:
- Length: 585 mm
- Width: 465 mm
- Ground Clearance: 73 mm
- Weight: 5.08 kg
- Height: 221 mm
- Wheelbase: 380 mm
- Front Shock Length: 87 mm
- Rear Shock Length: 87 mm
- Tires (pre-glued): 162 x 88 mm
- Wheels: 3.8 inches (97 mm)
- Speed Control: Velineon® VXL-6s
- Motor (electric): 2200kV
- Transmission: Single speed
- Gear Pitch: 1.0 Metric pitch (Mod-1)
- Final Drive Ratio: 20.49:1
- Differential Type: Sealed, 4-gear
- Center Differential Type: Sealed, 4-gear (20M weight oil)
- Chassis Structure / Material: Composite tub
- Brake Type: Electronic
- Drive System: Shaft driven 4WD
- Steering: Bellcrank
- Radio System: TQi™ 2-channel transmitter with 6533 TSM receiver
- Servo: Dual 2075
- Top Speed (optional gearing): 112+ kph
- Skill Level: 3
- Battery Compartment: 156 x 50 x 29 mm
Motor Specs:
- Type: 2200kV Sensorless brushless
- Weight: 406 g
- Length: 75.5 mm
- Diameter: 41.8 mm
- Connector Type: Traxxas 6.5 mm bullet connectors
ESC Specs:
- Input Voltage (cells): 4s–6s LiPo (max: 25.2 volts)
- Case Size: 58 x 72 x 46 mm
- Weight: 207 g
- On-Resistance (@Trans) – Fwd/Rev: 0.0003 Ohms per phase
- Reverse Delay: Yes, with lockout
- Low Voltage Detection (LVD): Yes, programmable
What’s in the box:
- E-Revo with VXL-6s ESC and 2200kV motor
- Quick Start Guide
- TQi™ 2.4GHz radio system
- High quality maintenance tools
What You’ll Need:
- Batteries: E-Revo requires dual 2s LiPo batteries or dual 3s LiPo batteries. See full list of batteries
- Charger: Traxxas EZ-Peak Live charger (2971) is recommended for easy and fast charging performance
- AA Alkaline Batteries: Four AA alkaline batteries for the transmitter
Support
Weight | 10 kg |
---|
Spare Parts
1726 – Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) TRX1726
€1.80 inc. VATAdd to cart1726 – Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) 1726 – Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Blast DCB …
1726 – Antenna, tube (1)/ vinyl antenna cap (1)/ wire retainer (1) TRX1726Read More
5150 E-clips 1.5mm (24) TRX5150
€1.95 inc. VATAdd to cart5150 E-clips 1.5mm (24) TRX5150 5150 E-clips 1.5mm (24) TRX5150 Set of 24 1.5 mm E-clips Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit™ E-Revo® VXL Brushless Jato® Revo® Slayer® Pro 4X4 Summit T-Maxx® TRX-4® Equipped with Traxx® TRX-4® Traxx® All-Terrain Track Set
1834 Body clips (12) (standard size) Body clips (12) (standard size)
€2.95 inc. VATAdd to cart1834 Body clips (12) (standard size) Body clips (12) (standard size) 1834 Body clips (12) (standard size) Body clips (12) (standard size) Replacement part for these models: 1/16 E-Revo® VXL 1/16 E-Revo® 1/16 Slash 4WD 1/16 Summit Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Jato Nitro Rustler Revo Rustler® …
1834 Body clips (12) (standard size) Body clips (12) (standard size)Read More
5343X Mount steering arm TRX5343X
€3.50 inc. VATAdd to cart5343X Mount steering arm TRX5343X 5343X Mount steering arm TRX5343X Mount, steering arm/ steering stops (2) (lower hinge pin retainer) (includes standard and maximum throw steering stops) Mount, steering arm/ steering stops (2) (lower hinge pin retainer) (includes standard and maximum throw steering stops) Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® Pro …
5114 Ball bearings blue rubber shield (5x8x2.5mm) (2) TRX5114
€4.95 inc. VATAdd to cart5114 Ball bearings blue rubber shield (5x8x2.5mm) (2) TRX5114 5114 Ball bearings blue rubber shield (5x8x2.5mm) (2) TRX5114 Ball bearings, blue rubber shield (5x8x2.5mm) (2) Pair of 5x8x2.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction.
5345R Servo horns
€7.90 inc. VATAdd to cart5345R Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) 5345R Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Replacement part for these models: E-Revo® VXL Brushless Revo Slayer Pro 4X4 Summit T-Maxx XO-1®
5378X Pivot ball caps / dust boots (4) TRX5378X
€7.95 inc. VATAdd to cart5378X Pivot ball caps / dust boots (4) TRX5378X 5378X Pivot ball caps / dust boots (4) TRX5378X Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Pivot ball cap set includes pivot ball caps (4), rubber dust boots …
8610 Body reinforcement set (fits traxxas #8611 body) TRX8610
€8.00 inc. VATAdd to cart8610 Body reinforcement set (fits traxxas #8611 body) 8610 Body reinforcement set (fits traxxas #8611 body) Traxxas body reinforcement sets provide added protection for your E-Revo during extreme driving. These high-strength composite reinforcements help spread impact forces through the body, ensuring long-lasting fun through the toughest landings and hardest hits. Accessory part for these models: …
8610 Body reinforcement set (fits traxxas #8611 body) TRX8610Read More
12x18x4mm 5120 Ball bearings, blue rubber sealed (2) TRX5120
€8.95 inc. VATAdd to cart5120 Ball bearings, blue rubber sealed (12x18x4mm) (2) 5120 Ball bearings, blue rubber sealed (12x18x4mm) (2) Replacement part for these models: 4-Tec® 2.0 AWD Chassis 4-Tec® 2.0 VXL AWD Chassis E-Revo® VXL Brushless Ford Fiesta® ST Rally Ford GT® Ford Mustang GT Hoss™ 4X4 VXL Revo Rustler® 4X4 VXL Rustler® 4X4 Slash 4X4 Platinum Slash …
12x18x4mm 5120 Ball bearings, blue rubber sealed (2) TRX5120Read More
17x26x5mm 5107A – Ball bearing, black rubber sealed (2)
€8.95 inc. VATAdd to cart5107A – Ball bearing, black rubber sealed (17x26x5mm) (2) 5107A – Ball bearing, black rubber sealed (17x26x5mm) (2) Replacement part for these models: E-Revo® VXL Brushless Maxx® TRX-4 Traxx™ All-Terrain Track Set TRX-4® Equipped with Traxx™ X-Maxx®
5378X Pivot ball caps dust boots TRX5378X
€9.95 inc. VATAdd to cart5378X Pivot ball caps dust boots TRX5378X 5378X Pivot ball caps dust boots TRX5378X Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck) Replacement part for these models: E-Revo® VXL Brushless Revo® Slayer® Pro 4X4 Summit T-Maxx®
7758A Wheel nuts splined 17mm serrated (black-anodized) (4) TRX7758A
€10.00 inc. VATAdd to cart7758A Wheel nuts splined 17mm serrated (black-anodized) (4) TRX7758A 7758A Wheel nuts splined 17mm serrated (black-anodized) (4) TRX7758A Wheel nuts, splined, 17mm, serrated (black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish …
7758A Wheel nuts splined 17mm serrated (black-anodized) (4) TRX7758ARead More
5632 Chassis brace, rear fits E-Revo / Summit TRX5632
€10.50 inc. VATAdd to cart5632 Chassis brace, rear fits E-Revo / Summit TRX5632 5632 Chassis brace, rear fits E-Revo / Summit TRX5632 Chassis brace, rear (fits E-Revo®/Summit) Reinforce your chassis with this blue-anodized aluminum rear chassis brace. Accessory part for these models: E-Revo® VXL Brushless Summit
5345X Servo horns, steering and throttle (for non-Traxxas® servos (Hitec, JR, KO, Airtronics))
€11.00 inc. VATAdd to cart5345X Servo horns, steering and throttle (for non-Traxxas® servos (Hitec, JR, KO, Airtronics)) 5345X Servo horns, steering and throttle (for non-Traxxas® servos (Hitec, JR, KO, Airtronics)) Revo, Slayer, and Summit require specially designed servo horns to maximize the performance of the linkages. The factory servo horns are compatible with Futaba style servo drives. Racers who …
5446 Wing Traxxxas Revo (black) TRX5446
€14.00 inc. VATAdd to cart5446 Wing Traxxxas Revo (black) TRX5446 5446 Wing Traxxxas Revo (black) TRX5446 Wing, Revo® (black)/ decal sheet Give your Revo® a new look with this black wing. Includes decals. Replacement part for these models: E-Revo® VXL Brushless Accessory part for these models: Revo®
6449R Spur gear 54-tooth steel TRX6449R
€19.95 inc. VATAdd to cart6449R Spur gear 54-tooth steel TRX6449R 6449R Spur gear 54-tooth steel TRX6449R Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch) 54-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration …
8654R Wheel hubs, splined, 17mm (red-anodized) (4)/ 4×5 GS (4)/ 3x14mm pin (4)
€21.50 inc. VATAdd to cart8654R Wheel hubs, splined, 17mm (red-anodized) (4)/ 4×5 GS (4)/ 3x14mm pin (4) 8654R Wheel hubs, splined, 17mm (red-anodized) (4)/ 4×5 GS (4)/ 3x14mm pin (4) This part requires the use of steel CV driveshafts when used on a Maxx. Accessory part for these models: Maxx® E-Revo® VXL Brushless
5472 Wheelie bar assembled (fits all 1/10th scale Revo trucks) TRX5472
€22.95 inc. VATAdd to cart5472 Wheelie bar assembled (fits all 1/10th scale Revo trucks) TRX5472 5472 Wheelie bar assembled (fits all 1/10th scale Revo trucks) TRX5472 The accessory Revo® wheelie bar is easy to install for controlled wheelies on demand with a unique quick release design. Four snap-in adjustment positions allow you to choose how extreme you want your wheelie …
5472 Wheelie bar assembled (fits all 1/10th scale Revo trucks) TRX5472Read More